Board and Kayak
Get A Fishing License
*Disclaimer: Board and Kayak earns a commission from qualifying purchases.
Updated on 6/20/2024
Abigail ScottBy Abigail Scott
I'm Abigail Scott, an author, adventurer, and mother of three. When I'm not navigating the beautiful chaos of motherhood, you can find me tackling the turbulent waters as a professional whitewater kayaker or scaling impressive rock faces as a climbing guide. The rush of adrenaline, whether from kayaking or climbing, is a feeling I cherish deeply. But the thrill doesn't stop there; I capture the breathtaking allure of nature through my lens as a professional photographer. And when I'm not submerged in the wild, my software engineering skills amplify my outdoor pursuits, allowing me to harness technology in unique ways. Through my writings, whether articles or blog posts, I share not just my adventures but my heart, hoping to spark a flame of inspiration in others to break boundaries and experience the world's wonders.
Learn More about Abigail Scott
AMP Research BedXTender - Black HD Max

AMP Research BedXTender - Black HD Max

Description

Title: AMP Research Black BedXTender HD Max Truck Bed Extender

Description: Classic U-Shaped design for maximum cargo capacity. Flip it out with the tailgate open to gain up to 2-feet of enclosed cargo area. Flip it inside and close the tailgate to keep tools and smaller cargo contained in the truck bed.

Classic U-Shaped design for maximum cargo capacity.

Flip it out with the tailgate open to gain up to 2-feet of enclosed cargo area or flip it inside and close the tailgate to keep tools and smaller cargo contained in the truck bed.

Torque-resistant clam-shell design with composite uprights and rounded-rectangle, 6063 T6 aluminum alloy tubes with durable powder coat finish.

Easy assembly and installation.

I see it fits a "standard bed". Does that include a 5.5' bed? I have a new 2014 supercrew. Thanks.

There is a different size bedXtender for each truck and each bed size and how you want to use it. I have a Dodge Ram dual cab and exchanged one xtender for a larger size so that it would extend to the very end of the tailgate. This way, I can fit motorcycles all the way to the end of the bed.

Work with a roll-up tonneau cover? 2011 F150 XLT

If you have a roll-up tonneau cover, you will need an additional mounting bracket kit (part # 74605-01A) that will prevent the bed extender from interfering with the side rails of the roll-up cover. Currently, we do not have this bracket kit on Amazon, but we do have it available in our warehouse and can add it to your order for an additional $27.00 if you call in to order. Our number is 1-800-305-1853. Thanks.

Will this fit a 2013 F150 SuperCrew?

Yes, I installed it on a 2013 Platinum which is a standard supercrew cab. It works on the short or long bed. If you want to avoid drilling into your bed walls, get the Ford F150 bracket install kit. It uses the same factory holes for the factory bed extender to install the mounting bracket. I did this since I had a factory-installed sprayed bed liner and did not want to drill into the liner or bed walls.

Will this work with a flip back tonneau cover without the special brackets?

Yes, I have the Undercover Ultra Flex flip cover and it works great. My only complaint on this bed extender is that on my '14 Ram 1500, the extender goes about 1/2" or a little less, passed the tailgate edge, and therefore it doesn't sit right on the tailgate. Still, it works as intended and locks in place using straps and tailgate locks.

Summary

Frequently Asked Questions

I see it fits a "standard bed". Does that include a 5.5' bed? I have a new 2014 supercrew. Thanks.

There is a different size bedXtender for each truck and each bed size and how you want to use it I have Dodge Ram dual cab and exchanged one xtender for larger size so that it would extend to very end of tailgate so I can fit motorcycles all the way to end of bed.

Work with a roll up tonneau cover? 2011 F150 XLT

Hi,If you have a roll up tonneau cover you will need an additional mounting bracket kit (part # 74605-01A) that will prevent the bedextender from interfering with the side rails of the roll up cover. Currently we do not have this bracket kit on Amazon but we do have it available in our warehouse and can add it to your order for an additional $27.00 if you call in to order.Our number is 1-800-305-1853.Thanks.

Will this fit a 2013 F150 SuperCrew?

Yes, I installed it on a 2013 Platinum which is a standard supercrew cab. It works on the short or long bed. If you want to avoid drilling into your bed walls get the Ford F150 bracket install kit. It uses the same factory holes for the factory bed extender to install the mounting bracket. I did this since I had a factory installed sprayed bed liner and did not want to drill into the liner or bed walls.

Will this work with a flip back touneau cover without the special brackets?

Yes, I have the Undercover Ultra Flex flip cover and it works great. My only complaint on this bed extender is that on my 14 Ram 1500 the extender goes about 1/2" or a little less, passed the tailgate edge and therefore it doesn't sit right on the tailgate. Still works as intended and locks in place using straps and tailgate locks.